Watch where you cut – even on dark nails
Trimming a pet's claws with thick, black claws can feel unsafe. When the pulp is not visible, it's easy to hesitate – and the fear of cutting incorrectly makes the whole situation unnecessarily stressful.
The PawTrimer™ makes it easier. The built-in LED light shines through the claw and helps you clearly see where the pulp goes. You get better control, reduce the risk of miscuts and can take care of the claw trimming calmly and safely at home.
More precision. Less stress. Both for you and your animal.
Cut and grind in one
With the 2-in-1 function, you first trim the claw to the correct length.
Then use the diamond grinding head to smooth and round off the edges.
The grinding gives a smoother finish and reduces the risk of sharp edges, which contributes to a more stable and natural step.
Why choose PawTrimmer™ 2-in-1?
A claw trimming tool should provide control, safety and precision. TassTrim™ is designed to make claw care easier – for both you and your pet.
LED light for better visibility
The built-in light helps you see where the pulp is going, even on dark nails, taking the guesswork out of cutting and reducing the risk of cutting too far.
Cut and grind in the same tool
After the cut, you can immediately smooth the edges with the integrated claw file. The result is smoother claws without sharp edges – easy and time-saving.
Smooth cleaning
Designed to be easily cleaned after use, keeping the tool fresh and ready for the next time.
Stable and ergonomic grip
The handle is designed to fit comfortably in the hand and provide good control throughout the entire cutting process. Less hand fatigue, better precision.
The PawTrimmer™ makes claw care more controlled, less stressful and easier to perform at home.
How to use the PawTrimmer 2-in-1
Hold the paw firmly but calmly
Make sure your dog is standing or lying down safely before you begin.
Turn on the LED lighting
The light helps you see the pulp more clearly – even on dark nails.
Cut in small steps
Cut a little at a time for full control.
Sand for a smooth finish
Use the diamond grinding head to round off the edges and get a smooth finish.
Technology like at a veterinary clinic – adapted for home use
This type of nail clipper is appreciated by many who find nail clipping at home to be unsafe or difficult. The combination of LED lighting and grinding function provides better control and reduces the risk of cutting too far - which is one of the most common concerns among pet owners.
If you have been to a veterinary clinic for nail trimming, you have likely seen similar equipment in use. Tools with lighting and a grinding function are used to provide better precision and a safer experience for the animal.
Now you get the same type of control – adapted for safe use at home.
Why choose TassTrim™ 2-in-1?
A claw trimming tool should provide control, safety and precision. TassTrim™ is designed to make claw care easier – for both you and your pet.
LED light for better visibility
The built-in light helps you see where the pulp is going, even on dark nails, taking the guesswork out of cutting and reducing the risk of cutting too far.
Cut and grind in the same tool
After the cut, you can immediately smooth the edges with the integrated claw file. The result is smoother claws without sharp edges – easy and time-saving.
Smooth cleaning
Designed to be easily cleaned after use, keeping the tool fresh and ready for the next time.
Stable and ergonomic grip
The handle is designed to fit comfortably in the hand and provide good control throughout the entire cutting process. Less hand fatigue, better precision.
TassTrim™ makes claw care more controlled, less stressful and easier to perform at home.
Specification
Color: Black/White
Function: 2-in-1 cutting and diamond grinding
Power supply: USB rechargeable
Operating time: Up to approximately 60 minutes
Charging time: Approximately 1.5–2 hours
LED lighting: Yes
Material: Stainless steel
1 Year Warranty
Is it loud or could it scare the animal?
No. The PawTrimmer™ 2-in-1 has a low noise level and is perceived as very quiet when in use. This makes it suitable even for dogs and cats that are sensitive to noise. For the best experience, you can accustom the animal gradually and end with praise or a small reward.
How to use it?
First, turn on the LED light to see the claw's bloodline more clearly. Then carefully cut in small steps with the claw scissors. After cutting, use the grinding function to smooth and shape the claw.
The product is suitable for both dogs and cats of various sizes. It is easily charged via USB and has a safety lock for safe storage between uses.
Is it safe for sensitive paws and the pulp?
Yes. The stainless steel, curved blades provide a clean and controlled cut. The safety stop limits how much can be cut at a time and the LED light helps you reduce the risk of getting too close to the pulp.
Is it suitable for all breeds and claw types?
Yes, it works for dogs, cats and other smaller pets. For extra thick or dark claws, it is recommended to cut small pieces at a time. Use the LED light for better control and finish with the file for an even result.
Is the handle comfortable and secure?
Yes. The spring-loaded handle provides even pressure and better precision. The non-slip grip surface reduces hand fatigue and the safety lock keeps the blades closed when the tool is not in use.
What do I do if I'm unsure how much to cut?
Cut a little at a time. Work in small increments, especially on dark claws where the pulp can be harder to see. The LED light helps you determine where it is safe to cut. Use the grinding function to shape the claw instead of taking too much at once.
